Generally, vessel sinks sit higher than under-mount or self-rimming sinks which is why the height of the faucet is not the same as that with other sinks. Today’s Slides: Vessel Sink Faucet Placement How High Should a Faucet Be Above a Vessel Sink? Updating your bathroom can be a major under-haul but I am sharing our complete tutorials for a complete DIY master bathroom remodel! As previously mentioned most countertop / deck mounted vessel faucets are a single hole design, with the water supply lines attaching inside the faucet body. This is particularly important for wall mounted taps. As we mentioned, if the faucet is set too far back or too far forward, it may cause splashing. Cleaning: Difficult to clean around the area where the vessel sink basin meets the vanity or countertop. But you should put the same thought into choosing your new faucet as you do that marble countertop or vessel sink, including understanding how your sink choices affect your faucet options. Vessel faucets are generally anywhere from 12 to 17 inches in height. The distance the spout reaches into the bowl and where the water falls and hits should also be considered. Most sink faucets have a spout reach of 5.5 inches on average but can go as high as 8 inches. Installation: Since vessel sinks sit on top of the vanity, installation is easier because you can avoid costly and difficult sink cut-outs.You need to only cut one hole for the drain. Counter-Based Faucet If you choose to use a counter-based faucet, make sure there is enough space between a 1/2-inch from the sink and the back of the counter top. Ideally, these should be mounted so the spout is no more than a few inches above the rim of the vessel after the sink is installed. Finally, you will need to make sure that the vessel and tap are compatible so there is not a lot of splash created when the water hits the sink. Another issue is that if it doesn’t have enough reach, you will need to lean over further, which could be uncomfortable if you need to do it for longer periods for washing dishes, for example. This gives a good height for ease of washing your hands be it adults or children. Stability: Vessel sinks are secured only at one point, rather than the entire perimeter. The faucet should be a few inches above the rim of the sink, but not much higher – as that can cause excessive splashing. The first step is to attach the supply lines to the faucet. You want your bathroom faucet to extend far enough into your sink for the water to cover your hands as you wash them and not splash out onto the side or back of the sink. The standard height for any sink and faucet is at least 6 inches from the bottom of the sink to the spout. If you just want to perk up a tired old bathroom, a new faucet is a great — and functional — way to do it. Pros and Cons of Vessel Sinks Pros: Style: Vessel sinks are a status symbol of luxury and sophistication.They instantly add elegance and charm to your bathroom and definitely give it that “wow” factor. Faucet installation is typically done first when dealing with vessel sinks since its easier to work without a large sink in the way. We’re going to look at when 5.5 inches of spout reach works and when it won’t. A recessed vessel sink, which sinks about half-way into the vanity but not as far as a drop-in sink, adds greater stability. This refers to how far over the sink the faucet extends. The length of the faucet head should enable the water to flow directly into the drain to avoid splashing.